Care & Use Manual

CARE & USE GUIDE FOR YOUR ENNOPURE® PRODUCTS

Thank you for choosing EnnoPure®!

Here’s your go-to guide for keeping your bottle in top shape to enjoy the purest water possible. With EnnoPure®, you’re not just hydrating -- you’re helping reduce plastic waste.

Beyond purity, it’s a cleaner, greener way to drink water.

GETTING STARTED

Your filter works best when used frequently. Replace filter every 2 months to keep your water tasting fresh.

Before initial use

Remove the filter, and wash the bottle thoroughly. See below for instructions to install a new filter.

Filter Installation

  1. Remove filter from packaging.
  2. Rinse and soak filter for at least 3 minutes.
  3. Securely install filter inside the housing by pushing the filter against the top piece, and twisting the bottom casing to enclose the filter.
  4. Push the straw into the cap base until it’s snug.
  5. Fill your bottle with cold or room temperature tap water, screw on the cap, flip up the straw, and start sipping!


PRODUCT CARE

BOTTLE

Hand Wash Instructions

  • Use mild detergent and warm water.Do not use bleach or cleansers containing chlorine to clean.
  • To remove stubborn stains,soak overnight with warm water and baking soda.
  • Hand washing helps preserve the finish of your bottle’s paint and artwork.

Dishwasher instructions

  • Do not use commercial dishwashers or high heat settings to prevent vacuum failure.
  • Avoid detergents with high chlorine or bromide levels.


FILTER

  • Initial Soak: Rinse and soak the filter for at least 3 minutes before first use.
  • Hand wash only, do not wash the filter with soap at any time.
  • Store the filter in a zip-lock bag in the fridge during long periods of non-use to extend its life and avoid odors.


SAFETY FIRST!

  • Only suitable for cold or room temperature water.
  • Do not put your bottle in microwave, oven, or freezer.
  • Tap Water Only: Use the filter for potable tap water only. Do not use with unsafe water without proper disinfection.
  • Ensure the lid is fully tightened before use.
  • Keep Away from Fire and Extreme Heat! Direct sunlight and high temperatures can affect insulation performance.
  • Do not drop the bottle from high altitudes; it might get damaged.


GUARANTEE

EnnoPure® products are warranted to be free from defects in workmanship and materials. This warranty does not cover malfunctions due to alteration, misuse, or accidents.

For any questions, or to purchase new filters, visit www.ennopure.com.